Features:
Support high voltage 5-12V receiver.
300W power relay.
Transparent heat shrinkable tube help users see the working status of the LED
clearly, stylish appearance.
Two LEDs indicate working status.
Max DC30V 10A
Add no signal protection
With boot protection, easy to operate
Input channels do not need to be calibrated, compatible with various brands
of remote - control devices
Small size and light weight
Application range:
Remote control model rocket launch
Remote control model smoke control
Weapon system control like real machine
Model aircraft's smoke control
Control of various remote switch systems
Switch the signals of two cameras
Control the opening and closing of various electrical power sources, such as
navigation lights, searchlights, strobe lights, buzzers, etc.
Control the camera shutter or switch the camera's recording and camera mode.
Functional Description:
The remote switch remotely controls the electrical equipment on the aircraft
model through a switch channel on the remote control, and the 1-way LED
dynamically demonstrates the current switch state in real time, so it can be
quickly started without an operation manual.
This device does not require calibration and can be accurately compatible
with remote control devices of various brands.
Typical application:
1. Connect
Plug the signal input cable into an idle
receiver channel (recommended for the two-stage switch channel), which
corresponds to a switch on the remote control.
The red indicator light will be illuminated
when connected to the receiver.
The blue work indicator lights up when the
switch channel is open, and vice versa.
2. Working mode
The red LED is always on; the signal is
normal. The red LED light flashes; no signal.
The blue LED indicates the relay's
operating status.
3. Trigger
Turn the switch on the remote control
(OFF->ON), the blue LED lights up and the relay starts to work.
Turn the switch on the remote control off
(ON-> OFF), the blue LED will go out and the relay will not work.
Package Included:
1pcs x RC relay switch
-400x400.jpg "RJX 5 Pairs 7A 30V 8Pin For DJI Mavic3 Drone Battery Connector Pitch 2.5mm Male Female plug")
